Alcone Performance Products, Inc. Products
Call Alcone at (505) 247.9470
Home
Products
Contact
Helpful Links


Racing Performance Air Induction and Filtration Housing

Racing performance
air induction and
filtration housings


Click on image for product photo

These spun aluminum housings feature a base that incorporates a 2 inch velocity stack and a tuning/splitter vane that causes 60% of the entering air to flow through the outer portion of the carburetor/TBI inlet. The cover is internally shaped to form a converging nozzle with the base. The nozzle efficiently accelerates the entering air so that more air can flow through the intake system with less pressure drop. These air induction housings flow in excess of 1000 CFM when used with a 4 inch high x 14 inch OD paper filter element. You can expect approximately 3% more airflow when a cloth or foam filter element is substituted.

The AC-01 fits the single stud GM TBI used from '87 to '91 and all 5-1/8 dia. Carburetor applications.

The AC-02 fits the dual stud GM TBI used from '92 to '95

Product Details & Ordering Info | Installation Guide

Street Performance Air Induction and Filtration Housing Street performance
air induction and
filtration housings


Click on image for product photo

These spun aluminum housings are similar in appearance to the racing units shown above. They feature a base that incorporates a 2 inch velocity stack, the internal surface of the cover is flat. These units offer significant performance improvement (40% more flow) over the factory air induction system and flat-bottomed aftermarket air cleaner housings at a very attractive price.

The AC-01F fits the single stud GM TBI used from '87 to '91 and all 5-1/8 dia Carburetor applications.

The AC-02F fits the dual stud GM TBI used from '92 to '95

All of the air induction systems described above have been granted an exemption by the California Air Resources Board (ARB), EO-477-1. This exemption applies to General Motors light trucks equipped with V-8 or V-6 motors equipped with Throttle Body Injection (TBI) intake systems.

Product Details and Ordering Info | Installation Guide

 

Copyright © 1999-2012 Alcone Performance Products, Inc.
1423 Los Tomases Dr. NW
Albuquerque, NM 87102
(505) 247-9470

ja@alconeproducts.com